fix: configure dotenv in zshrc

Signed-off-by: Anthony Oteri <4360016+anthonyoteri@users.noreply.github.com>

.config/btop/btop.conf

@@ -1,18 +1,18 @@
-#? Config file for btop v. 1.4.5
+#? Config file for btop v.1.4.6
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "gruvbox"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = True
+theme_background = true
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
+truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
+force_tty = false
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,10 +22,13 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = True
+vim_keys = true
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -57,37 +60,40 @@ update_ms = 2000
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = False
+proc_reversed = false
 
 #* Show processes as a tree.
-proc_tree = False
+proc_tree = false
 
 #* Use the cpu graph colors in the process list.
-proc_colors = True
+proc_colors = true
 
 #* Use a darkening gradient in the process list.
-proc_gradient = True
+proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
+proc_per_core = false
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
+proc_mem_bytes = true
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = True
+proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
+proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
-proc_left = False
+proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
+proc_filter_kernel = false
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = False
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -98,28 +104,28 @@ cpu_graph_upper = "Auto"
 cpu_graph_lower = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
+cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
+cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
+cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
-show_uptime = True
+show_uptime = true
 
 #* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
-show_cpu_watts = True
+show_cpu_watts = true
 
 #* Show cpu temperature.
-check_temp = True
+check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
+show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -131,17 +137,17 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
+base_10_sizes = false
 
 #* Show CPU frequency.
-show_cpu_freq = True
+show_cpu_freq = true
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
+background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
@@ -151,43 +157,43 @@ custom_cpu_name = ""
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = True
+mem_graphs = true
 
 #* Show mem box below net box instead of above.
-mem_below_net = False
+mem_below_net = false
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
+zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
-show_swap = True
+show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
+swap_disk = true
 
 #* If mem box should be split to also show disks info.
-show_disks = True
+show_disks = true
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
+only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
+use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
+zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = False
+disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
+show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = false
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
+io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -199,10 +205,10 @@ net_download = 100
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
+net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
+net_sync = true
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
@@ -211,14 +217,17 @@ net_iface = ""
 base_10_bitrate = "Auto"
 
 #* Show battery stats in top right if battery is present.
-show_battery = True
+show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
 #* Show power stats of battery next to charge indicator.
-show_battery_watts = True
+show_battery_watts = true
 
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true

.config/ghostty/config

@@ -0,0 +1,29 @@
+theme = Aardvark Blue
+font-family = FiraCode
+font-size = 14
+window-padding-x = 10
+window-padding-y = 10
+window-decoration = true
+copy-on-select = clipboard
+background-opacity = 0.9
+background-blur = 90
+adjust-cell-height = 10%
+window-colorspace = "display-p3"
+window-padding-balance = true
+macos-non-native-fullscreen = false
+macos-window-buttons = visible
+macos-titlebar-style = transparent
+macos-titlebar-proxy-icon = visible
+macos-dock-drop-behavior = new-tab
+macos-option-as-alt = true
+macos-window-shadow = true
+macos-hidden = never
+macos-auto-secure-input = true
+macos-secure-input-indication = true
+macos-applescript = true
+macos-icon = official
+macos-icon-frame = aluminum
+macos-shortcuts = ask
+background-blur = true
+term = xterm-256color
+shell-integration-features = no-cursor,no-sudo,title

.config/nvim/lazyvim.json

@@ -2,7 +2,7 @@
   "extras": [
 
   ],
-  "install_version": 7,
+  "install_version": 8,
   "news": {
     "NEWS.md": "11866"
   },

.config/nvim/stylua.toml

@@ -1,3 +1,3 @@
 indent_type = "Spaces"
-indent_width = 4
+indent_width = 2
-column_width = 120
+column_width = 120

.config/ohmyposh/omp.toml

@@ -12,12 +12,12 @@ final_space = true
   yellow = '#fabd2f'
 
 [secondary_prompt]
-  template = '<p:yellow,transparent></><,p:yellow> > </><p:yellow,transparent></> '
+  template = '<p:blue,transparent></><,p:blue> > </><p:blue,transparent></> '
   foreground = 'p:black'
   background = 'transparent'
 
 [transient_prompt]
-  template = '<p:yellow,transparent></><,p:yellow> {{ .Folder }} </><p:yellow,transparent></> '
+  template = '<p:blue,transparent></><,p:blue> {{ .Folder }} </><p:blue,transparent></> '
   foreground = 'p:black'
   background = 'transparent'
 
@@ -37,13 +37,13 @@ final_space = true
     trailing_diamond = ''
     template = ' {{ if .SSHSession }} {{ end }}{{ .UserName }} '
     foreground = 'p:black'
-    background = 'p:yellow'
+    background = 'p:blue'
     type = 'session'
     style = 'diamond'
 
   [[blocks.segments]]
     template = '  <b>{{ path .Path .Location }}</b> '
-    foreground = 'p:orange'
+    foreground = 'p:blue'
     powerline_symbol = ''
     background = 'p:black'
     type = 'path'
@@ -56,12 +56,12 @@ final_space = true
     background = 'p:black'
     type = 'git'
     style = 'powerline'
-    foreground_templates = ['{{ if or (.Working.Changed) (.Staging.Changed) }}p:green{{ end }}', '{{ if eq .Background "p:yellow" }}p:black{{ end }}']
+    foreground_templates = ['{{ if or (.Working.Changed) (.Staging.Changed) }}p:green{{ end }}', '{{ if eq .Background "p:blue" }}p:black{{ end }}']
-    background_templates = ['{{ if or (.Working.Changed) (.Staging.Changed) }}p:yellow{{ end }}']
+    background_templates = ['{{ if or (.Working.Changed) (.Staging.Changed) }}p:blue{{ end }}']
 
   [[blocks.segments]]
     template = '  '
-    foreground = 'p:yellow'
+    foreground = 'p:blue'
     powerline_symbol = ''
     background = 'p:black'
     type = 'root'
@@ -89,7 +89,7 @@ final_space = true
 
   [[blocks.segments]]
     template = ' <b>{{ .Version }}</b>'
-    foreground = 'p:yellow'
+    foreground = 'p:blue'
     background = 'transparent'
     type = 'python'
     style = 'plain'
@@ -113,7 +113,7 @@ final_space = true
   trailing_diamond = ''
   template = '  {{ .Profile }}{{ if .Region }}@{{ .Region }}{{ end }} '
   foreground = 'p:white'
-  background = 'p:orange'
+  background = 'p:blue'
   type = 'aws'
   style = 'diamond'
   tips = ['aws']

.config/tmux/tmux.conf

@@ -17,13 +17,13 @@ bind -r j resize-pane -D 5
 bind -r k resize-pane -U 5
 bind -r l resize-pane -R 5
 # Gruvbox color palette
-set -g @gruvbox_fg '#ebdbb2'
+#set -g @gruvbox_fg '#ebdbb2'
-set -g @gruvbox_bg '#282828'
+#set -g @gruvbox_bg '#282828'
-set -g @gruvbox_yellow '#fabd2f'
+#set -g @gruvbox_yellow '#fabd2f'
-set -g @gruvbox_blue '#458588'
+#set -g @gruvbox_blue '#458588'
-set -g @gruvbox_red '#cc241d'
+#set -g @gruvbox_red '#cc241d'
-set -g @gruvbox_green '#98971a'
+#set -g @gruvbox_green '#98971a'
-set -g @gruvbox_orange '#d79921'
+#set -g @gruvbox_orange '#d79921'
 
 # Status bar customization
 set -g status-bg '#282828'
@@ -103,7 +103,8 @@ set -g @plugin 'tmux-plugins/tmux-continuum'
 set -g @plugin 'fcsonline/tmux-thumbs'
 set -g @plugin 'sainnhe/tmux-fzf'
 set -g @plugin 'wfxr/tmux-fzf-url'
-set -g @plugin 'egel/tmux-gruvbox'
+#set -g @plugin 'egel/tmux-gruvbox'
+set -g @plugin 'jimeh/tmux-themepack'
 set -g @plugin 'christoomey/vim-tmux-navigator'
 set -g @plugin 'omerxx/tmux-sessionx'
 set -g @plugin 'omerxx/tmux-floax'
@@ -134,8 +135,8 @@ set -g @resurrect-strategy-nvim 'session'
 
 
 # Gruvbox theme plugin: use dark mode
-set -g @tmux-gruvbox 'dark'
+#set -g @tmux-gruvbox 'dark'
-
+set -g @themepack 'powerline/block/blue'
 
 # Initialize TPM (Tmux Plugin Manager)
 run '~/.tmux/plugins/tpm/tpm'

.gitconfig

@@ -140,4 +140,8 @@
 [safe]
     directory = *
 
-# vim: set commentstring=#\ %s:
+# vim: set commentstring=#\ %s:
+[rebase]
+	updateRefs = true
+[remote "origin"]
+	fetch = +refs/heads/*:refs/remotes/origin/*

.zshrc

@@ -45,7 +45,7 @@ zinit ice wait"2"; zinit snippet OMZP::common-aliases
 zinit ice wait"2"; zinit snippet OMZP::debian
 zinit ice wait"2"; zinit snippet OMZP::docker
 zinit ice wait"2"; zinit snippet OMZP::docker-compose
-zinit ice wait"2"; zinit snippet OMZP::dotenv
+#zinit ice wait"2"; zinit snippet OMZP::dotenv
 zinit ice wait"1"; zinit snippet OMZP::eza
 zinit ice wait"2"; zinit snippet OMZP::gh
 zinit ice wait"1"; zinit snippet OMZP::git